The Team

Adam Rana, Project Manager

Jungkyoo Park, Stress Analyst

Ilute Nyambe, Finance Officer
Ravi Parmar, Material Specialist
Arnold Ngang, Chief Designer

Saturday, 17 April 2010

Metal Bars for support




These are placed at the top of the main beam structure to hold the main beam and rotating beams together.

Beam used in Lifting ( top)




This is the rotating beam situated at the top. With the help of the supporting bar, the winge system at the back and the eye bolt, the beam can move up and down to meet target objects before lifting and after lifting.

Note that in the final assembly, it is used as an H-beam. this was to ensure that the beam could be properly mounted onto the main crane supporting structure.

The main Beam structure.




This is the main structure which controls the weight og the object being lifted. Two winge systems will be install ; one at the back of the beam and the other to the side. The winge sytem to the back of the beam will help the top beam to be hoisted up and down such that it reached its target object before carrying out any lifting action. The winge sytem to the side will will be use to alternate the cord lengths.

To the side are aslo metal bars. these are positioned such that they can aid in the rotation of the whole crane system and eventually move object from one position to the another.

Mechanics and Calculations

Friday, 16 April 2010

Rotating base (part 2)



combines with the second rotating part for rotation.

Thursday, 15 April 2010

Rotating base



This is another part of the base. It sits in the hole on the base to help ease the rotation. this part will be connected to another support to provide more stability. the rectangle intrusion at the top will be for mounting the top half of the crane i.e the beams and its upporting structure.

BRITTLE FRACTURE

BRITTLE FRACTURE

what is brittle fracture?

Basically, brittle fracture is a rapid run of cracks through a stressed material. The cracks usually travel so fast that you can't tell when the material is about to break. In other words, there is very little plastic deformation before failure occurs. In most cases, this is the worst type of fracture because you can't repair visible damage in a part or structure before it breaks.
In brittle fracture, the cracks run close to perpendicular to the applied stress. This perpendicular fracture leaves a relatively flat surface at the break. Besides having a nearly flat fracture surface, brittle materials usually contain a pattern on their fracture surfaces. Some brittle materials have lines and ridges beginning at the origin of the crack and spreading out across the crack surface.
Other materials, like some steels have back to back V-shaped markings pointing to the origin of the crack. These V-shaped markings are called chevrons. Very hard or fine grained materials have no special pattern on their fracture surface, and amorphous materials like ceramic glass have shiny smooth fracture surfaces. Chevron Fracture Surface (Callister p. 185)
Radiating Ridge Fracture Surface (Callister pg. 186, copyright by John Wiley & Sons, inc.)

Types of Brittle Fracture

The first type of fracture is transgranular. In transgranular fracture, the fracture travels through the grain of the material. The fracture changes direction from grain to grain due to the different lattice orientation of atoms in each grain. In other words, when the crack reaches a new grain, it may have to find a new path or plane of atoms to travel on because it is easier to change direction for the crack than it is to rip through. Cracks choose the path of least resistance. You can tell when a crack has changed in direction through the material, because you get a slightly bumpy crack surface.